GRAPHITE RESIDUE CONE
INGOT
MACHINED GRAPHITE
RESIDUE CONE – CUP
SEPARATE
HEAVY METAL
GOLD
FROM IMPURITIES
A Graphite Conical Mold with a round cone shape
cavity used to separate residue and impurities form gold.  The mold is made with High Density fine grain
graphite is machined from solid Graphite Extruded Bar, self-releasing, the graphite block is approximately 3″ square, weighting about 1-1/2Lbs (See specs below).
The round
tapered cone cavity has a 2″ diameter top opening and tapered to a point at
the bottom, with a depth of 1-1/2″
Melt and pour the molten material into this cone mold to help separate
the heavier Gold which collects at the bottom tapered point and all the residue
and impurities stay on the upper portion of the cone.
SPECIFICATION:
JETS Product # 0318-5602
–
Overall Block Measurement:
3-5/32″ x 3-5/32″ x 3-5/32″ (+/-)
–
Overall Measurement Metric:
80mm x 80mm x 80 mm
–
Mold Top Opening Diameter:
2″ – 50mm
–
Mold Cavity Depth:
1-1/2
“
–   38.5mm
–
Mold Cavity Conical:
Tapers to a Point
–
Mold Weight:
1.4 Lbs. – 625grms
.
NOTE:
Contact us with any questions or for any assistance in the
Melting Process, the Glazing of Crucibles and the use and care of Ingot Molds.
Visit
JETSTOOLS
ebay Store Listings, where you can see many more sizes of Ingots,
Crucibles, Melting Materials, Accessories like Gloves, Goggles and other
Supplies along with a selection of
J
ewelers
E
quipment
T
ools and
S
upplies
.
JETSINC.
PP 1.5L  816 CKP M