Freeman Injection Wax Turquoise Blue Wax Jewelry Making Lost Wax Casting 1 Lb
Rated 3 out of 5 based on 3 customer ratings
$7.39
230
Type:Jewelry Mold Return shipping will be paid by:Seller Condition:New All returns accepted:Returns Accepted Restocking Fee:No Item must be returned within:30 Days Refund will be given as:Money back or replacement (buyer's choice) Country of Manufacture:Made in USA Injection Wax for Lost Wax Casting:Jewelry Injection Wax by Freeman Modified Item:No California Prop 65 Warning:This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/ Brand:Freeman Country/Region of Manufacture:United States
JEWELRY INJECTION WAX – FOR LOST WAX CASTING FREEMAN FLAKE INJECTING WAX TURQUOISE BLUE – 1 Lb BAG All Purpose Jewelry Injection Wax suited for a wide variety of applications: Rings, Charms, Pendants components. This injection wax is an all-purpose wax, highly fluid when melted for easy injection and release even with the most intricate molds. Consistently reproduce your molds with perfect results. Melt at 150ºF (66ºC). Freeman injection wax is compounded from the purest virgin waxes & resins, Freeman injection wax offers good performance and consistent quality. TECHNICAL INFORMATION: · To obtain optimum results, you should “tweak” the wax temperature one degree at a time, bringing it down to the coolest injection temperature possible. Be sure to allow at least one hour soak time between tests to permit the wax to fully stabilize at the new temperature setting. · Always inject molds at the lowest possible pressure setting (typical injection pressures range from 2-10 PSI). This will eliminate or minimize flashing and mold lines, greatly reduce clean up time, and will ensure similar pieces are the same weight. Other savings include reduced metal loss and faster finishing. · Molten injection waxes are Flammable at temperatures in excess of 350°F / 177°C. · Hot injection waxes can cause skin burns. Avoid contact with skin. Adequate eye protection and protective clothing is strongly recommend ed. JETS Product # 2311-2031 Made by Freeman Characteristics: – Color – TURQUOISE BLUE – Form – Flakes – Flexibility – Medium – Shrinkage – Minimal – Injection Temperature – 150º F to 160º F (66º C to 71ºC) – Injection pressure – Low to 10PSI (0.70 kg/cm2) – Self-Releasing Agent Packaged in 1Lb Plastic Sealed Bag- SALE IS FOR 1 POUND Item is New, in Original Sealed Bag from Freeman. SHIPPING: Via USPS MAIL DOMESTIC Shipping via Priority Mail NOTE: Visit JETSTOOLS our eBay store for many other Lost Wax Casting Supplies and products, including Casting Investment Powders and more J ewelers E quipment T ools and S upplies . JETSINC. 213 CKSP 15.9 Z M P
