1911 Black Full-Sized Government
“Punisher” Style
Compensator Muzzle Brake
Check our other listings in our Ebay Store
for
Stainless Steel Black, Stainless Steel Machine (silver) and Stainless Steel Satin (matte) finishes!!!
We recommend all Punisher Style Compensators be installed by professional gunsmith; however, we have included this instructional video to show the proper, easy way to install your 1911 Punisher Style Compensator
https://youtu.be/uAu6lg_k9_U
LOWEST PRICE ON EBAY!!!
***BUY IT NOW***
***ONLY $38.95***
This is a brand new stainless steel muzzle brake compensator which replaces the barrel bushing and usually installs in less than a minute. Don’t waste your valuable time or money on products made from low carbon steel.
The 1911 compensators produced in our shop are made from Stainless Steel.  Retaining accuracy longer than low carbon steels and other inferior metals. This item will not rust or warp.
The design is contoured to mimic the front of the slide, and give the appearance of having an extended slide.  The bushing ID. Is .583″ +-.0005″. In general, this part is machined to fit any 1911 stock or clone pistol that has a barrel OD. between .577″-581″.
Even with a standard, stock size barrel, the part may require some fitting depending on your individual barrel and slide combination, but is machined to spec to fit onto a stock configured 1911.
THIS DOES NOT FIT THE COMMANDER MODEL!
CARE
&MAINTENANCE INSTRUCTIONS:
After
firing 50 rounds (each time), we strongly suggest you remove the compensator
and clean both it and the barrel to remove any residue build up, which can
eventually cause your weapon to malfunction. This is considered to be part of
the “proper maintenance, care and use of this part. If proper steps are not
taken to care and clean this part, continued use of this part on your weapon
may result in a damaged part or weapon. We will not and do not refund or
replace parts if this is the case.
We ARE NOT liable
for damage caused to this part or your weapon, due to lack of proper maintenance,
improper installation of part, or “forced” installation of part on weapon that
does not have matching specs. If this part is installed on a weapon that does
not have matching specs, all implied warranty/guarantee of a refund or
replacement is VOID. We DO NOT AND WILL NO LONGER issue refunds for damaged,
altered or misused parts that are returned to us.
We only accept returns for refunds on undamaged, resalable parts
only!
RETURN POLICY:
Returns will be
accepted within 30 days of receipt of item.
ALL returned items
must be in resalable condition
.
Refunds will be
issued for items that are returned undamaged, unaltered, and in resalable
condition. If the item is returned to us and is found to be altered or damaged,
a refund WILL NOT be issued and the buyer will be reported to Ebay for misuse
of the return policy. We DO NOT issue replacements. We will no longer replace
items that are returned to us damaged. If you ordered the wrong finish, we ask
that you return the item for a refund and purchase another.
WILL THIS COMPENSATOR FIT MY WEAPON?
I HAVE A …..
Every compensator we machine is the same size with the same specs detailed in this listing (
ID Is .583″ +-.0005 fit any 1911 clone pistol that has a barrel OD between .577″-581″)
, but we can’t say the same for every gun.
Every one of our compensators should fit on 1911 clones with barrel bushing the same specs as our part; however, they will not fit on a bull barrel.
We advise all buyers in doubt of whether the part will fit their weapon, to go to a gunsmith or local gun shop to confirm that the compensator will fit their weapon before ordering to avoid the cost of having to ship the part back for a refund.
If your gun is a 1911 clone, and has a barrel bushing but the comp will not fit on your gun, we recommend you take it to your local gunsmith for fitting.
If you do not wish to have your compensator modified or “fitted”, we ask that you send it back to us unmodified and in resalable condition
(buyer responsible for cost shipping to return item/s)
THIS DOES NOT FIT THE COMMANDER MODEL!
Please make sure the part and your weapon’s barrel specs are compatible. If you have a question as to whether it will fit your weapon, please refer to your weapon’s barrel specs.
If you are unsure of your weapon’s specs, we recommend taking the weapon to a professional gunsmith or your local gun shop so they can better assist you.
Support American Jobs!!!
Check out our feedback on Quality and Delivery!
MADE IN
U
S
A
!
Support American Jobs!!!
Sorry, NO INTERNATIONAL SHIPPING!
FAST & FREE SAME DAY SHIPPING
USPS FIRST CLASS MAIL
(
not insured
)
Not responsible if lost or damaged during shipping process!!!!
Orders Placed by 10:00 a.m. CST ships same day!!
FEEDBACK FROM ACTUAL EBAY CUSTOMERS:
Looks grate easy to install on my
citadel would recommend this to anyone.
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
Extremely nice quality piece, fast
shipping, great price, highly recommended!!!
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
Very nice made fit exactly. Shipping
was fast and free.
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
Great item. Fits perfectly. Quick
shipping. Very happy A+++
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
A+ item as described
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
Fast shipping Fit perfect on my
Llama 1911 clone thanks Bro!!
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)
Fits perfectly on my Taurus PT-1911.
Exactly as described. Great seller.
1911 Punisher Style 45 ACP
Compensator Black MIL Spec Finish In Stock!!! (#301128829508)